I hope this article will help the pimples players rather than inverted players. The pimples players who use no sponge version of pimples attach the rubber to the blade with glue sheet. After long time usage, the glue sheet becomes very much permanently attached to the blade. It is hard to remove. How do you remove the whole pimple rubber from the blade?
If the pimples rubber is very much attached to the blade, and if you can’t peel that off from the blade, you have to try some of these options. The soft and thin long pimples can come out from the glue sheet easily. There are three elements we are looking at her. The wood part of the blade, the glue sheet and the rubber on the glue sheet. Being careful, you may be able to remove the rubber from the glue sheet first. This leaves the glue sheet on the blade.
The next task is to remove the glue sheet from the blade. You may now peel the glue sheet off from the blade. If that does not work, use a hair dryer and blow little heat on the blade surface. This will melt the glue sheet. This melted stage of the glue sheet is easy to peel. If the glue becomes harden again, use the hair dryer and blow the heat little more time. Don’t use the hair dryer too long to blew on the blade surface.
Good luck with glue sheet peeling!
Sponsor Ad: TableTennisStore.US - 1000 XIOM, TSP, JOOLA, CHAMPION table tennis products!
{ 2 comments… read them below or add one }
microwave is good way to melt glue
If you don’t have a hair dryer.